4-channel 5V USB Relay Module
- $18.99
- Ex Tax:$18.99
- Product Code:101-70-118
- Availability:In Stock
SPECIFICATION4 SPDT relays SRD-5VDC-SL-CRelay specification: 10A 250VAC/10A 125VAC/10A 30VDC /10A 28VDCPower Supply - 5 VDCCurrent consumption - 200 mAFT245RL. Datasheet (..
SPECIFICATION
- 4 SPDT relays SRD-5VDC-SL-C
- Relay specification: 10A 250VAC/10A 125VAC/10A 30VDC /10A 28VDC
- Power Supply - 5 VDC
- Current consumption - 200 mA
- FT245RL. Datasheet (http://www.ftdichip.com/)
- Led for each relay output
- Power Led
- USb led
- Size - 101*40*16mm
- PCB parameters: FR4 / 1.5mm / two layers / metalized holes / HAL / white stamp / solder mask
- Extra PCB openings for better voltage isolation
- Doubled high current tracks
Supply Characteristics:
| Type | SRD-5VDC-SL-C | ||
| Recommend voltage | VDC | 5 | |
| Voltage limits | Including ripple | VDC | 4...7 |
| Nominal input current | Voltage 5VDC | mA | 300 |
| Power dissipated | When all relays are ON | W | 3.6 |
| Protection | Against reverse polarity | None |
Relay output:
| Type | 12V-T73-USB | |||||||||||
| Relay type | T73 | |||||||||||
| Relay outputs count | 4 | |||||||||||
| Contact type | NO, NC | |||||||||||
| Current consumption | 5VDC | mA | 30 | |||||||||
| Switching parameters |
|
|
|
Notice:
- When the board is connected to the PC and the PC is restarted, the relays will be toggled several times. This is because of the structure of the FTDI chip.
- The device must be supplied with 5 VDC or order to work.
- There is no protection against reversed voltage! If the VCC(+5V) and GND are reversed the board will be damaged!
- The board can not work without computer